Toyota RAV4 EE Owner's Manual page 303

1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station. (See "SEEK/TRACK"
or "TUNE·FILE".) Push and hold down the
button until you hear a beep—this will set
the station to the button. The preset but-
ton number will appear on the display.
To recall a preset station: Push the button
for the station you want. The preset but-
ton number and station frequency will ap-
pear on the display.
This radio can store one AM and FM sta-
tions for each button. (The display will
show "AM" or "FM" when you push the
"AM−DAB" or "FM" button.)
(Eject button)
Push this button to eject one or all com-
pact discs.
To eject the current compact disc, push
and release the button.
To eject a specific disc, push the ""
(preset button 3) or "" (preset button 4)
until the number of the disc you want to
eject is displayed. Push and release the
eject button.
To eject all discs at a time, push and hold
the eject button until you hear a beep.
The last compact disc played before push-
ing the button will be ejected first. If the
ejected disc is not removed for a long
time, the eject function will be cancelled.
RAV4_EE
AUDIO AND HANDS−FREE PHONE SYSTEMS
AF (Alternative Frequency)
This button is used for seeking RDS (Ra-
dio Data System) stations all over the
band.
Each time you push the "AF" button, the
AF mode will change in the following or-
der:
In AF−ON mode the radio changes fre-
quency to the strongest signal of the se-
lected station.
AF on: "AF" appears on the display. In
this mode, the radio switches over to the
broadcasting station providing good recep-
tion within the same PI (Program Identifi-
cation) code. Switching between different
regional programs of the same station
might occur.
REG on: "REG AF" appears on the dis-
play. In this mode, the radio switches over
to a broadcasting station providing good
reception within the same local PI (Pro-
gram Identification) code.
To turn the AF function off, push the but-
ton once again.
AM−DAB
Push the "AM−DAB" button to turn on the
AM band. "AM" will appear on the display.
AST (Autostore)
This button is used to automatically preset
frequencies of up to six radio stations for
each band (FM and AM).
Push the "AST" button until a beep is
heard. If the radio cannot seek out any
stations, it will receive the frequency be-
fore you operate "AST".
Finish
293