Toyota RAV4 EE Owner's Manual page 218

208
GAUGES, METERS AND SERVICE REMINDER INDICATORS
Type A
Type B
SETTING UNITS
Select the setting units display. Each time
the "DISP" switch is pushed, the display
is changed as shown in the above illustra-
tion. The unit can be set by pushing and
holding the "DISP" switch.
RAV4_EE
—Odometer and two trip
meters
The following meters are displayed in
the multi−information display. Pushing
the "ODO/TRIP" knob changed the me-
ters.
1. Odometer—Shows the total distance
the vehicle has been driven.
2. Two trip meters—Show two different
distances independently driven since
the last time each trip meter was set
to zero.
You can use one trip meter to calculate
the fuel economy and the other to
measure the distance on each trip. All
trip meter data is cancelled if the elec-
trical power source is disconnected.
3. "ODO/TRIP" knob—Resets the two trip
meters to zero, and also change the
meter display.
To change the meter display, quickly
push and release the knob. The meter
display changes in the order from the
odometer to trip meter A to trip meter
B, then back to the odometer each
time you push.
To reset the trip meter A to zero, dis-
play the meter A reading, then push
and hold the knob until the meter is
set to zero. The same process can be
applied for resetting the trip meter B.
The units of the meters can be changed.
For details, see "—Selecting the units and
language" on page 206.
Finish