Toyota RAV4 EE Owner's Manual page 308

298
AUDIO AND HANDS−FREE PHONE SYSTEMS
ST (Stereo reception) display
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. "ST" appears on the display. If the
signal becomes weak, the radio reduces
the amount of channel separation to prev-
ent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion.
TA (Traffic Announcement)
This button is used for receiving TA sta-
tions all over the band.
EON (Enhanced Other
tem—If the RDS station (with EON data)
you are listening to is not broadcasting a
traffic information program at the TA (Traf-
fic Announcement) mode, the radio will be
switched to the traffic information program
automatically by using the EON AF list.
After the traffic information ends, the radio
will return to the initial program automati-
cally. A beep will sound to tell you when
this feature starts and ends the operation.
When receiving FM:
Push the "TA" button to switch the radio
mode to TP (Traffic Program). "TP" will
appear on the display.
In the TP mode, the radio will begin seek-
ing a TP station. If the radio seek out a
TP station, the program name will appear
on the display. If the TA station is re-
ceived, the radio will be switched to the
traffic information program automatically.
When the program ends, the initial opera-
tion resumes. When also in AF mode, the
radio will seek a TP station by using the
AF list.
Push the "TA" button once again to switch
the radio mode to TA. "TA" will appear on
the display and the radio will mute the
volume of FM station.
RAV4_EE
In the TA mode, the radio will begin seek-
ing a TP station. It sounds only when a
TP station is received. When a TP station
is received, the program service name will
appear on the display. In the AF mode,
the radio will also begin seeking a TP
station by using the AF list.
While the radio is seeking a TP station,
"TP SEEK" appears on the display. If the
radio cannot seek out any TP stations,
"NOTHING" will appear on the display for
2 seconds and the radio will begin seek-
ing a TP station again.
If the TP signal is halted for 20 seconds
after the TP mode was set, the radio will
seek another TP station automatically.
Network) sys-
When listening to a compact disc:
Push the "TA" button to switch the radio
mode to TA. "TA" will appear on the dis-
play.
When
starts, the "CD" mode is interrupted and
the traffic information is automatically
broadcasted. When the program ends, the
initial operation resumes.
"TA" volume memory function—The volume
at receiving the traffic announcement is
memorized.
The range of volume memory is limited:
if the volume received previously is great-
er than the maximum range of the volume,
this will become the maximum range and
if it is less than the minimum, this volume
will be the minimum range.
You can adjust the volume independently
from the memorized "TA" volume range
while receiving a "TA" station. (Refer to
"PWR·VOL")
To return to the normal mode from the TA
mode, push the "TA" button once again.
the traffic information
Finish
program