Phone Setup - Toyota RAV4 EE Owner's Manual

320
AUDIO AND HANDS−FREE PHONE SYSTEMS
DISPLAY
1. Bluetoothr display
Displays when a Bluetoothr connection is
made. If there is no
Bluetoothr connection has not been made
and communication between the phone
and system is not possible. When using
the hands−free system, make sure that
"BT" is displayed. The display is updated
in real time.
2. Reception level display
Displays the reception level of the cellular
phone signals. This may not match the
display on the cellular phone. The recep-
tion level of some cellular phones may not
be displayed.
The number of bars is greater when the
signal received is stronger.
3. Message display
Displays phone numbers, names, com-
ments, menu items, etc.
RAV4_EE

—Phone Setup

The phone setup menu includes the fol-
lowing:
Pair Phone
D
To use the hands−free system, you need
to register your phone in the system.
Once you have registered it, you can
make a hands−free call. Up to 6 phones
can be registered.
Select Phone
D
When the system connects to Bluetoothr,
the phone previously used is automatically
selected. Select a different phone if nec-
essary. Only the selected phone can be
used with the hands−free system.
Change Name
D
The registered phone names can be
display, the
changed.
List Phones
D
The registered phone names can be
checked.
The following can be performed during the
name playback:
Select phone
D
Change name
D
Delete
D
Set Passkey
D
The passkey can be changed. A 4 to 8
digit code can be input as a passkey.
Delete
D
The registered phones can be deleted.
To enter the phone setup menu
1. Push the off−hook switch to turn the
hands−free system on.
2. Turn the "AUDIO/CONTROL" knob until
"Setup" is displayed and push the
knob.
3. Turn the "AUDIO/CONTROL" knob until
"Phone Setup" is displayed and push
the knob.
"XXX (phone name)" is displayed.
If no phone has been registered, "No
Phone" is displayed.
Finish