Using Your Fax Machine As A Phone; Dialing A Telephone Number; On-Hook Dialing; Redial - Konica Minolta 7013 Operating Instructions Manual

Basic operation

Using your fax machine as a phone

Your fax machine can also be used as a phone, if a telephone is connected to your fax
machine. The following is a brief look at the machine's telephone features.

Dialing a telephone number

1
Pick up the telephone's handset which is connected to your fax machine.
You will hear a dial tone.
2
Dial the number by the using numeric keypad.
— or —
Press the one-touch key. (See "One-touch phone dialing," on page 3.4.)
— or —
Press /
SPEED DIAL TEL INDEX
ber. (See "Phoning via speed-dial," on page 3.6.)
— or —
Press /
SPEED DIAL TEL INDEX
using the cursor key, then press
3.8.)
3
When the other person answers, begin speaking.

On-hook dialing

Because your machine has a monitor speaker, you can dial without picking up the
handset.
1
Press / . You'll hear a dial tone (unless you have set your speaker
MONITOR CALL
volume to Off; see page 1.8), and the
** Tel Mode **
_
2
Dial the number you want. Use either the numeric keypad, a one-touch key, a
speed-dial number or telephone index to dial.
2.18
once, then press the three digit speed-dial num-
twice, then search the name you want to call
. (See "Telephone Index dialing," page
START
shows:
LCD
Important: Your machine's monitor speaker is not a speaker phone. If a person
answers the call, pick up the telephone's handset to speak.
Note: If the call fails, press
MONITOR

Redial

Note: To use / key, you should assign it to a Soft key in advance. (See
REDIAL PAUSE
page 3.16.)
1
Lift the telephone's handset which is connected directly to your fax machine
to get a dial tone.
2
Press / . The
REDIAL PAUSE LCD
View Redial History
0:1234567890
3
Your machine can remember the latest 10 dial numbers. Press
the dial number you want to redial appears.
4
Press .
START
When the other person answers, use the telephone to speak to that person.

Changing the dialing type

If, with your machine set for "pulse" dialing, you must enter tones ("
call, press once (the "–!" symbol will be shown on the
DIALING OPTIONS
machine now will "tone" dial all subsequent numbers.
Note: To use key, you should assign it to a Soft key in advance.
DIALING OPTIONS
(See page 3.16.)
Note: Using this key enables tone transmission from the numeric keypad after the
call is connected. When you hang up the call, your machine will return to
"pulse" dialing for the next call.
/ to hang up.
CALL
will show:
DTMF
LCD
or until
") during a
). Your