Table of Contents
Advertisement
Operating tips
Changing modes
You can use this machine not only as a
fax machine, but as a copier as well.
Press
/
to change to the fax
COPY
FAX
mode or copy mode.
Fax mode: If you want to use facsimile
features, change to the Fax mode.
Copy mode: If you want to use copier
function, change to the Copy mode.
When the machine is in the Fax mode,
the
light on the control panel is on, and if the machine is in the Copy mode, the
FAX
light is on.
COPY
Note: You cannot switch modes in any of the following cases:
• When scanning a fax message for transmission.
• During the real time transmission.
• When programming any function settings.
Standby display of each mode:
Fax Ready
1 Jan 2001
0:00
In Fax mode
Turning off the power
Fax documents stored in memory will be lost 72 hours after you turn the power
switch off or unplug the power cord. (See "Specifications," page
COPY/FAX key
Copy Ready
1
A4
Auto
100%
In Copy mode
.1.)
AI
How to operate the machine
To press: 0 (zero), 1, 2, 3, 4, 5, 6, 7, 8, 9, # or *
Use:
The numeric keypad.
Tip:
At no other time within this manual will we refer to the letters printed
below the numeric keys and their uses (such as accessing abc by pressing
the 2 key.) These letters are there only for your convenience in using your
fax machine as a telephone.
To press:
,
,
,
or any other letter key
A
B
C
D
Use:
The one-touch key labeled with that letter.
Tip:
Please don't confuse the zero (0) with the letter
Here's an example. If we say "press Program key,
... you'd press Program key
... then
... then 1
... then 0 (the numeric key zero)
... then 1
... and then
Note: Even though our example above includes commas, do not enter them into
the fax machine. Those characters appear in our instructions to separate
one number from the other. They do not need to be entered into your fax
machine.
There is a function (broadcasting) which requires commas to be entered, but
there is a special way to enter them. We'll explain this process later.
In other way, you can search almost all of your machine's function using the cursor
key. See page 1.13.
Getting started
.
O
, 1, 0, 1,
" ...
A
ENTER
(one-touch key 01(A))
A
ENTER
1.11
Advertisement
Chapters
Table of Contents
