Konica Minolta 7013 Operating Instructions Manual page 77

Advanced features
6
Use the numeric keypad to enter the 4-digit
address and not the -
ITU T
Note: If you enter an invalid
and aborts this operation.
7
The machine is now asking you to name this F-Code box. The
03:Box Name;Upper
_
If you do not want to enter or change this F-Code box's name, skip to step 9.
If you do want to enter or change this F-Code box's name, go on to step 8.
8
Enter the name by using the one-touch keys. (If necessary, review "Entering
characters", page 1.12) An F-Code box's name can be up to 16 characters in
length.
9
Press to save the box's name and continue. The
ENTER
03:Sub-Address No.
_
The fax machine now asks for this F-Code box's sub-address. This is the
numerical identifier you must enter in order to communicate with any remote
F-Code compatible fax.
If you do not want to change an existing sub-address, skip to step 11.
10
Use the numeric keypad to enter the sub-address to identify this F-Code box.
The sub-address can be up to 20 characters in length and include any
combination of numbers and the * and # characters (but no other non-
numeric characters).
03:Sub-Address No.
654321_
Note: No other F-Code box in this machine can have the same sub-address
as the one you enter here.
11
Press to save the sub-address.
ENTER
Note: If you entered a sub-address already being used by another F-Code
box, the machine beeps and briefly displays:
03:Sub-Address No.
Sub-Address In Use
The machine now returns you to step 10. Please enter a different
number for your F-Code box's sub-address.
3.26
. . code (not the
I D ITU
password) and then press .
ENTER
. . code, the fax machine rejects the attempt
I D
03:Box Name;Upper
or
Konica America_
shows:
LCD
03:Sub-Address No.
or
123456_
12
- sub- Next, the machine asks for your F-Code box's password. This is the password
T
for
ITU
03:Password
_
shows:
LCD
Note: You don't need to have a password for the F-Code box. However, using
If you do not want to enter or change this box's password, skip to step 14.
13
Use the numeric keypad to enter this box's
password can be up to 20 characters in length and include any combination of
numbers and the * and # characters (but no other non-numerical characters).
Here, we've entered 135*7#9.
03:Password
135*7#9_
Note: You cannot change the type of an existing F-Code box. If you're modi-
14
Press
Box Type
The fax machine is asking which box type you want to assign to this box —
bulletin, security or relay.
Press
15
Press
If you chose Bulletin, go on to step 16.
If you chose Security, skip to step 17.
If you chose Relay, skip to step 20.
If you chose Bulletin:
16
The bulletin box has four additional settings:
• Reception protection ("Rx Protect" on the
• Automatic printing of received documents ("Auto Print")
• Overwriting documents ("Overwrite Doc.")
• Erasure of transmitted documents ("Erase Tx Doc.")
- -compatible F-Code fax transactions. The
T
or
a password will make your F-Code communication much more secure.
fying an existing F-Code box and want to change the box type, you
first must erase the old box, then create a new one.
to save the password. The
ENTER LCD
:Bulletin
/ /Enter
or until the type of box you want appears.
.
ENTER
shows:
LCD
03:Password
123456789*#_
- -compatible password. This
ITU T
now shows:
)
LCD