Konica Minolta 7013 Operating Instructions Manual page 81

Advanced features
3
Press . The shows:
ENTER LCD
03:F-Code Document
Enter I.D. Code:****
4
Use the numeric keypad to enter your F-Code box's four-digit
Here we've entered 2345:
03:F-Code Document
Enter I.D. Code:2345
5
Press .
ENTER
If you've entered an incorrect
and aborts this operation.
If you've entered the correct
03:F-Code Document
File No.
6
Use the numeric keypad to enter the file number (1-30) of the document you
want to print. Here we've entered 3.
03:F-Code Document
File No.
Note: If you want to print all documents stored in the bulletin box, simply
enter 0 (zero).
7
Press .
ENTER
Your fax machine prints the chosen document(s), then returns to standby
mode.
Note: If the F-Code box is not storing any documents, the machine briefly
displays the following before returning to standby mode:
03:Select F-Code Box
No Document Stored
3.30
. . code.
I D
. . code, your fax machine rejects the attempt
I D
. . code, the display shows:
I D
:_
:3_
Erasing a document stored in a bulletin box
To erase a stored document:
1
Press Program key, , 2, 0, 2,
D
Select F-Code Box
01:Konica
2
Use the numeric keypad to enter the two-digit number (01-50) of the F-Code
bulletin box that stores the document you want to erase. We've entered 03:
Select F-Code Box
03:Konica America
3
Press . The shows:
ENTER LCD
03:F-Code Document
Enter I.D. Code:****
Note: If the F-Code box is not storing any documents, the machine briefly
displays the following before returning to step 2:
Select F-Code Box
No Document Stored
4
Use the numeric keypad to enter your F-Code box's four-digit
Here we've entered 2345:
03:F-Code Document
Enter I.D. Code:2345
5
Press .
ENTER
If you've entered an incorrect
and aborts this operation.
If you've entered the correct .
I
03:F-Code Document
File No.
6
Use the numeric keypad to enter the file number (1-30) of the document you
want to erase. Here we've entered 3.
03:F-Code Document
File No.
Note: If you want to erase all documents stored in the bulletin box, enter 0
(zero).
The shows:
ENTER LCD
. . code.
I D
. . code, your fax machine rejects the attempt
I D
. code, the display shows:
D
:_
:3_