Konica Minolta 7013 Operating Instructions Manual page 105

Advanced features
4
Depending on if you have already entered at least one number into the
blocked numbers list, the
Enter Fax Number
01:_
5
If you want to modify an existing entry in the blocked numbers list, press
or until you see the number you want to modify.
... or ...
If you want to enter a new number in an already-started blocked numbers
list, press or until you find an empty position in the list.
Then press to enter or modify the blocked number.
ENTER
Note: To clear a number from the list, see "Clearing a number from the
blocked numbers list," right column.
6
Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber of 972-555-3038, you should enter 5, 5, 5,
ID
3, 8:
Enter Fax Number
01:555-3038_
To change a specific digit, press
cursor is under the digit, then use the numeric keypad to enter the correct
number.
7
Press to save the setting. The
ENTER
numbers list.
If you do not want to enter or change a number for this slot, go on to step 8.
If you do want to enter or change a number for this slot, repeat steps 5–7.
8
Press . Your machine will return to standby mode.
STOP
3.54
shows one of the following:
LCD
Select BlockJunk No.
or
01:555-2971
DIALING OPTIONS
to move left or to move right until the
shows the next "slot" in the blocked
LCD
Clearing a number from the blocked numbers list
To clear a number from the list:
1
Press Program key,
If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.
Block Junk Fax:Off
2
Press or until you see your preference, Mode2 or Mode3.
Block Junk Fax:Mode2
3
Press . The
ENTER
Select BlockJunk No.
01:555-2971
, 3, 0,
4
Press or until you see the number you want to clear.
5
Press to clear the number.
CANCEL
To clear another number from the blocked numbers list, repeat steps 4–5.
Otherwise, go on to step 6.
6
Press to return your machine to standby mode.
STOP
Printing a list of the blocked numbers
Forgot which number is stored in the blocked number list? Just print a list of the
blocked numbers.
To print a list of the blocked numbers, press Program key,
, 2, 1, 0, .
B ENTER
/ /Enter
/ /Enter
shows:
LCD
, 1, 1, 0, .
E ENTER