Settings For Operation; Setting The Silent Mode - Konica Minolta 7013 Operating Instructions Manual

Changing the default settings

Settings for operation

Setting the silent mode

Default setting: Off
Silent mode allows you to mute the ringer, the alarm and the key tones.
• Ringer — If you turn the ringer off in silent mode, a ring alerts you when you
receive fax or voice call.
• Alarm — If you disable the alarm in silent mode, the sound your machine
makes when an error occurs and the beep your machine makes after sending or
receiving a fax or making a copy cannot be heard.
• Key tone — If you mute the key tone, your machine will not make a sound when
you press the buttons on the control panel.
1
Press Program key, , 1, 0, 4,
B
ting:
Silent Mode
/ /Enter
2
Press or until the mode you want appears.
Note: If you chose On, the silent mode of Ringer, Alarm or Key tone can be
set to be available. If you chose Off, the machine will ring and beep as
usual.
If you chose Off, skip to step 10.
3
Press to save the setting. The
ENTER
on or off:
Ringer Silent
/ /Enter
4
Press or until the mode you want appears.
If you want to turn off the ringer, select "On" and the machine will be quiet.
Otherwise, the machine will ring.
5
Press to save the setting. The
ENTER
on or off:
Alarm Silent
/ /Enter
4.8
. The shows your fax's current set-
ENTER LCD
:Off
now asks if you want the ringer to be
LCD
:Off
now asks if you want the alarm turned
LCD
:Off
6
Press or until the mode you want appears.
If you want to turn off the alarm, select "On" and the machine will be quiet.
Otherwise, the machine will beep.
7
Press to save the setting. The
ENTER
or off:
KeyBuzzer Silent:Off
/ /Enter
8
Press or until the mode you want appears.
If you want to turn off the tones, select "On" and the machine will be quiet.
Otherwise, the machine will beep when the keys are pressed.
9
Press to save the setting.
ENTER
If you turned off the alarm or the key tones in the steps above, your machine
gives you the option of setting the volume for the alarm and key tones. If this
option appears, skip to step 10.
If you didn't turn any of these off, your fax machine returns to standby mode.
10
The shows your fax's current setting:
LCD
Alarm&Key Volume:Mid
/ /Enter
11
Press or until the mode you want appears.
Below are the possible settings:
Alarm&Key Volume:Max
/ /Enter
Alarm&Key Volume:Mid
/ /Enter
Alarm&Key Volume:Min
/ /Enter
12
Press to save the setting.
ENTER
now asks if you want the key tones on
LCD
= Loudest setting.
= Medium setting.
= Low setting.