Table of Contents
Advertisement
Basic operation
Recording paper size
As default, your machine selects the paper source automatically, however if you
wish to select the paper source manually, press
desired paper size is displayed. The
2nd cassette (if installed), the bypass tray and Auto select mode.
Note: If the bypass tray has no paper, the
the bypass tray.
Note: When you choose the auto paper select mode, the
shows "Auto" and the all LED of the paper source will
be lit.
However, if the bypass tray has no paper and the
optional 2nd paper cassette has not been installed,
the machine will show the " [(paper size)] " instead
of "Auto" although you select auto paper select mode.
And it lights the LED of the paper source that can be
used only.
Select Document type
•
— Select this mode when copying photographs or
PHOTO
drawings.
•
/
— Select this mode when copying documents
PHOTO
TEXT
containing photographs or drawings with letters.
•
— Select this mode when copying letters.
TEXT
To select the document type, press
A glowing
indicates the machine is using the setting named by that
LED
2.16
repeatedly until your
PAPER SIZE
toggles the paper size in the 1st cassette,
LCD
shows "None" for the paper size of
LCD
LCD
PHOTO
PHOTO
/TEXT
TEXT
RESOLUTION
repeatedly.
DOCUMENT
Adjust image contrast
Setting the contrast allows you to compensate for any excessive light or darkness, of
the document pages you are copying.
To change the contrast setting, press
A glowing
LED
by that
.
LED
Note: To avoid confusing the Light and Dark settings, just
remember — "Light lightens" and "Dark darkens" — to
keep it straight.
DOCUMENT
.
LED
repeatedly.
CONTRAST
indicates the machine is using the setting named
DARK
NORMAL
LIGHT
CONTRAST
Advertisement
Chapters
Table of Contents
