Konica Minolta 7013 Operating Instructions Manual page 33

Basic operation
Resolution, grayscale
Reviewing resolution and grayscale:
• Normal resolution (" " on the control panel) is suitable for most typed
NORM
documents and simple drawings.
• Fine resolution (" " on the control panel) is ideal for maps, moderately compli-
FINE
cated drawings, floorplans or handwritten documents.
• Superfine resolution (" -
S FINE
reproduces the detail of extremely complicated drawings or line art.
• Grayscale mode ("
HALFTONE
shades in photos and drawings.
Note: If you send a fax in superfine, certain fax models (especially older models)
receive it only in fine mode. However, you can send a fax in grayscale mode
to virtually any fax machine currently in use.
To change the resolution setting, press
A glowing indicates the fax is using the setting named by
LED
that . For example, in the drawing (right), the machine is set
LED
for resolution.
FINE
Contrast
Setting the contrast allows you to compensate for any excessive lightness or dark-
ness, as the case may be, of document pages you are sending or copying.
To change the contrast setting, press
A glowing indicates the fax is using the setting named by
LED
that .
LED
Note: To avoid confusing the Light and Dark settings, just
remember — "Light lightens" and "Dark darkens" — to
keep it straight.
2.2
" on the control panel, "S Fine" on the
" on the control panel; "Gray" on the
LCD
repeatedly.
RESOLUTION
repeatedly.
CONTRAST
Mixing resolution and contrast in a multiple page
When you send the document with more than one page, you can select different res-
olutions and contrasts for each page.
Insert your documents, select resolution and contrast for first page, dial and press
. Then follow one of the following two procedures.
START
When the document is placed in the
)
LCD
Select resolution and contrast before the next page is scanned.
When the document is placed on the platen glass:
) captures
1
Remove the previous page and place the next page.
2
Select resolution and contrast. Then press
Dialing pause
HALFTONE
S-FINE
Some long-distance systems require dialing pauses, and pauses can also be useful
FINE
when you're dialing through special telephone exchanges.
NORMAL
To insert a pause, assign
DOCUMENT
/
REDIAL PAUSE
RESOLUTION
entered lasts for a factory-set two seconds.
For example, pressing 9,
2 5 5 5 2 0 0 9.
Helpful Tip: You can change the dialing pause length within 2 to 10 seconds.
Potential problems with call-waiting and voice mail
DARK
Telephone call-waiting signals can stop fax transmission and reception. And any
service — such as voice mail — which may intercept your calls can keep your fax
NORMAL
machine from receiving fax calls.
If you use only one line for both phone and fax, consult your telephone company to
LIGHT
see how you can temporarily disable call-waiting or voice mail while using the fax
CONTRAST
machine.
:
ADF
NEXT DOC
/ to a Soft key (see page 3.16), and then press
REDIAL PAUSE
. (The pause character ( -/ ) will appear on the
/ , 19725552009 dials 9 [2-second pause] 1 9 7
REDIAL PAUSE
(see "Changing the pause length," page 4.5.)
.
.) Each pause
LCD