Table of Contents
Advertisement
Getting started
Installing the printing supplies
Your fax prints incoming faxes and copies with a reliable 600 dpi print engine. Your
fax requires two types of printing supplies (sometimes also called consumables):
• The drum cartridge — It yields 20,000 "normal" A4-sized printouts (see
"Specifications," page
.2). By "normal," we're referring to the amount of text
AI
and/or graphics on each page. This is based on an industry-standard test docu-
ment.
• The toner cartridge — It yields 16,000 "normal", A4-sized printouts (see
"Specifications," page
.2).
AI
Note: The toner cartridge included with your machine is starter toner cartridge,
which yields 3,000 printouts. Please purchase regular, full-yield toner car-
tridge from your authorized Konica dealer.
To install these supplies:
Important: Gently close the top cover so that you don't catch your hands, possibly
injuring them.
1
Pull up the top cover
release and open the top
cover.
2
Slide the printer cover
release and open the
printer cover.
1.6
3
Unpack a new toner cartridge from its
carton. Then, holding the toner car-
tridge with both hands, slowly shake it
to distribute the toner evenly inside the
cartridge.
Note: Do not touch the roller of the
toner cartridge.
4
Gently install the toner cartridge in
the printer, making sure the toner car-
tridge's two pins fit in the slits inside
the printer frame.
5
Unpack the drum cartridge from its carton.
Note: Shield the drum cartridge from light, especially strong light. Later, if
you have to remove the cartridge from the machine, immediately
wrap it in a thick cloth to protect it from light.
6
Gently install the drum cartridge in
the printer, making sure the drum
cartridge's four pins fit in the slits
inside the printer frame.
Advertisement
Chapters
Table of Contents
