Printing Your Settings; Printing A Program List - Konica Minolta 7013 Operating Instructions Manual

Changing the default settings
2
Press or until the mode you want appears.
In this example, we've chosen On.
2-Bin Tray
/ /Enter
If you chose On, proceed to step 3.
If you chose Off, skip to step 7.
3
Press . The asks you to select Lower or Upper tray for copy exit.
ENTER LCD
Press or until the tray you want appears.
In this example, we've chosen Upper.
Copy exit
/ /Enter
4
Press to save the setting.
ENTER
The now asks you to select Lower or Upper tray for fax reception.
LCD
Press or until the tray you want appears.
In this example, we've chosen Lower.
Fax exit :Lower
/ /Enter
5
Press to save the setting.
ENTER
The now asks you to select Lower or Upper tray for list printing.
LCD
Press or until the tray you want appears.
In this example, we've chosen Lower.
List exit
/ /Enter
If your machine has the optional RS-232C interface kit, proceed to step 6.
Otherwise, skip to step 7.
6
The now asks you to select Lower or Upper tray for PC printing.
LCD
Press or until the tray you want appears.
In this example, we've chosen Lower.
PC-FAX exit
/ /Enter
7
Press to save the setting.
ENTER
4.10
:On
:Upper
:Lower
:Lower

Printing your settings

After you've programmed settings into your machine, print a settings list. We
recommend this, particularly if you're sharing the machine with other users, who
might change the settings.
With this list, you can quickly confirm that all of your settings are correct, without
having to go back and check them on the machine. Or, if you do need to undo
someone else's changes, this list guides you in returning the machine to your
preferred settings.
Settings are divided into three; Machine Settings, Fax Settings and Copy Settings.
To print the Machine settings list, press Program key,
The will show the following as the list prints:
LCD
Machine Settings
** Printing **
To print the Fax settings list, press Program key,
The will show the following as the list prints:
LCD
Fax Settings
** Printing **
To print the Copy settings list, press Program key,
The will show the following as the list prints:
LCD
Copy Settings
** Printing **
Note: Please refer to the index at the end of these instructions to locate any
settings you don't recognise or understand.

Printing a program list

Your machine can also print a program list. This lists the functions available on your
fax machine and the keystrokes needed to complete them. (See also "Function Table,"
pages 1.14 – 1.17.)
To print a program list, press Program key, *, 8.
, 1, 0, 1, .
E ENTER
, 1, 0, 2, .
E ENTER
, 1, 0, 3, .
E ENTER