Konica Minolta 7013 Operating Instructions Manual page 92

12
If you want the transmission to begin immediately every time you press the
key, press and skip to step 15.
ENTER
If you want to delay the transmission, press
13
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2: Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time when the fax should perform the command:
Delayed
Enter Time: 00/17:05
14
Press , .
ENTER ENTER
15
The asks if you want to make additional settings for this programmable
LCD
one-touch number.
Option :Off
/ /Enter
If you do not want to make additional settings, press
If you do want to make additional settings, press
16
The asks which resolution you want to use for this programmable one-
LCD
touch number.
Resolution :------
/ /Enter
17
Press until the mode you want appears.
Note: For any of the following settings, choose "-----" if you do not want to
specify the displayed setting for this programmable one-touch key.
, .
ADVANCED FUNCTIONS ENTER
on the 30th.")
PM
today.")
PM
. Skip to step 29.
ENTER
and .
ENTER
18
Press . The asks you to select a contrast mode for each programma-
ENTER LCD
ble one-touch number.
Contrast :-------
/ /Enter
19
Press until the mode you want appears.
20
Press . The asks if you want the memory transmission on or off
ENTER LCD
when using this programmable one-touch number.
Memory Tx :---
/ /Enter
21
Press until the mode you want appears.
22
Press . The asks you for the type of confirmation report you want to
ENTER LCD
set for this programmable one-touch number.
Report :---
/ /Enter
23
Press until the mode you want appears.
24
Press . The asks if you want to send a cover page for this program-
ENTER LCD
mable one-touch number.
Cover Page :---
/ /Enter
25
Press until the mode you want appears.
26
Press . The asks if you want to turn the Fax & Copy feature on or
ENTER LCD
off for this programmable one-touch number.
Fax & Copy :---
/ /Enter
Note: When the memory transmission is set to off in step 20, this
not appear and go to step 29.
27
Press until the mode you want appears.
28
Press .
ENTER
29
Press to return your machine to standby mode.
STOP
Advanced features
will
LCD
3.41