Table of Contents
Advertisement
12
If you want the transmission to begin immediately every time you press the
key, press
and skip to step15.
ENTER
If you want to delay the transmission, press
13
Next, tell your fax to carry out this delayed command one of these ways:
Option 1:
Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2:
Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time when the fax should perform the command:
Delayed
Enter Time: 00/17:05
14
Press
,
.
ENTER
ENTER
15
Press
to return your machine to standby mode.
STOP
,
.
ADVANCED FUNCTIONS
ENTER
on the 30th.")
PM
today.")
PM
Programming a batch transmission
For this operation to work, two things must be true:
• The batch box you're using must exist on your fax machine.
• You must know the batch box's identifier number (1–5).
To program a batch transmission into a programmable one-touch key:
1
Press Program key,
, 3, 0, 1,
A
grammable one-touch number available:
Select Program No.
P2:No Number Stored
Note: If P2 appears on the
LCD
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Select Program No.
P1:Polling Document
Press
to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.48.
2
Press the key that you want to program or change. Here, we've selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was for a batch transmission
and you want to keep this key programmed for a batch transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
3
If you want to select a different programmable one-touch key than the one
that appears on the
, press that key now.
LCD
4
Press
. The
asks which operation you want to program into the pro-
ENTER
LCD
grammable one-touch:
Type :Communication
/ /Enter
Note: If changing a previously stored command, skip to step 7.
Advanced features
. The
shows the first empty pro-
ENTER
LCD
, it means that you have already entered a
3.43
Advertisement
Chapters
Table of Contents
