Konica Minolta 7013 Operating Instructions Manual page 57

Advanced features
Fax dialing via speed-dial
To dial a fax call using a speed-dial number:
1
Place the document in the
2
If you are using the platen glass, enter the document size by pressing the
.
DOCUMENT SIZE
3
Adjust resolution and contrast if necessary.
4
Press /
SPEED DIAL TEL INDEX
Enter Speed-Dial No.
S_
5
Use the numeric keypad to enter the three-digit identifier (such as 018, in this
example) for the speed-dial number you want to dial. The
Location (or fax number) you stored:
ID
Plano Office
S018_
6
Press .
START
What happens next depends on whether you specified memory transmission or real
time transmission:
If you specified quick memory transmission:
• Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
• While dialing, your machine scans the other documents into memory.
• The shows the Location
LCD
Plano Office
A4 Normal
Note: If the entry doesn't have a Location
• When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick memory transmission, see page 2.3.)
If you specified normal memory transmission:
• Your fax machine scans your entire document into memory, then dials the other
fax machine.
3.6
, or on the platen glass.
ADF
. The shows:
LCD
LCD
and the document's width and resolution settings:
ID
, the number appears.
ID
• The
LCD
Plano Office
A4
Note: If the speed-dial entry doesn't have a Location
• When the other machine answers, your fax will transmit the document directly
from memory. (To review Memory transmission, see page 2.3.)
If you specified real time transmission:
• Your fax machine dials the other fax machine.
• The
LCD
Plano Office
A4
shows the
Note: If the speed-dial number doesn't have a Location
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes. (To review the Real time transmission, see page 2.3)
Phoning via speed-dial
To dial a phone call using a speed-dial number, you must have a telephone attached
to your machine. To make the call:
1
Obtain a dial tone by doing one of the following:
• Lift the handset
• Press
2
Press
**
S_
3
Use the numeric keypad to enter the three-digit identifier for the speed-dial
number you want to dial. As the machine dials, it shows the number on the
:
LCD
**
9-555-5783_
Note: Remember that your fax machine's monitor speaker is not a speakerphone.
If you dialed using the monitor speaker, pick up the handset to speak to the
person that answers!
Note: If the call fails, and you used
hang up.
shows the Location and the document's width and resolution settings:
ID
Normal
shows the Location and the document's width and resolution settings:
ID
Normal
/ to use the monitor speaker
MONITOR CALL
/ . The shows:
SPEED DIAL TEL INDEX LCD
Tel Mode **
Tel Mode **
/
MONITOR CALL
, the number appears.
ID
, the number appears.
ID
to dial, press / to
MONITOR CALL