Konica Minolta 7013 Operating Instructions Manual page 90

Programming regular polling
To program a regular polling operation into a programmable one-touch key:
1
Press Program key, , 3, 0, 1,
A
grammable one-touch number available:
Select Program No.
P2:No Number Stored
Note: If P2 appears on the
LCD
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Select Program No.
P1:Polling Document
Press to go back to the programmable one-touch key you want to
enter.
2
Press the key that you want to program or change. Here, we've selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was for a polling transmission
and you want to keep this key programmed for a polling transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
Note: To erase a programmable one-touch key, see page 3.48.
3
If you want to select a different programmable one-touch key than the one
that appears on the , press that key now.
LCD
4
Press . The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
/ /Enter
Note: If changing a previously stored command, skip to step 7.
5
Press until "Communication" appears.
Type :Communication
/ /Enter
. The shows the first empty pro-
ENTER LCD
, it means that you have already entered a
6
Press . The now shows either:
ENTER LCD
P2:Fax#/Advan.Func.
_
7
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
P2:Fax#/Advan.Func.
9-5550696_
Your display shows only 20 characters at a time. To view characters beyond
those 20, press to scroll to the left or
Important: Do not press
ENTER
8
Next, while you can still see the fax number on the
twice and then press
TIONS ENTER
9
If you want the polling to begin immediately every time you press the key,
press and skip to step 12.
ENTER
If you want to delay the polling, press
10
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2: Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
Delayed
Enter Time: 00/17:05
11
Press , .
ENTER ENTER
12
Press to return your machine to standby mode.
STOP
Advanced features
P2:Fax#/Advan.Func.
or
9-5558743_
to scroll to the right.
.
, press
LCD ADVANCED FUNC
.
, .
ADVANCED FUNCTIONS ENTER
on the 30th.")
PM
today.")
PM
-
3.39