Konica Minolta 7013 Operating Instructions Manual page 69

Advanced features
6
Press the keys exactly as you operate the job you want to program into the
Macro key.
Note: You can program up to 60 steps. When it comes over 60 steps, your fax
machine asks if you register the operations you have entered. If you
want to register them, press
Note: If you want to cancel the operations you have set, press
,
MACRO PROGRAM
Example 1: To program some operations for copy: Press
the copy mode, and set number of the copies, paper size, contrast, resolution,
reduction/enlargement rate and sort setting as you want.
Note: See "Making copies" (pages 2.12–2.17) for detail operations.
Example 2: To program the operations for printing the one-touch numbers
list: Press Program key,
7
If you programmed
ENTER
Otherwise, press
MACRO PROGRAM
8
If you want to start immediately after pressing the Macro key when you use
it, press . If not, press
ENTER
Note: If you want to confirm the settings or operations in the Macro key
before you start it, press
Include Start/Enter?
Check Enter/Cancel
9
The now shows:
LCD
M2:Name
_
The machine now asks you to name this job.
If you do not want to enter or change this job's name, skip to step 11.
10
Enter the name by using the one-touch keys. (If necessary, review "Entering
characters", page 1.12) A job's name may be up to 130 characters in length.
11
Press to save the setting.
ENTER
3.18
. If not, press
ENTER STOP
and then go back to step 1.
STOP
COPY
, 1, 0, 6, .
E ENTER
or into the operation, proceed to step 8.
START
and skip to step 9.
.
CANCEL
here.
CANCEL
;Upper M2: Name ;Upper
or
Delayed_
Copying with the Macro key
To copy using a Macro key:
1
Insert the document.
.
2
Press the Macro key in which you've stored the copy command.
3
Press
/ to change
FAX
Printing lists using the Macro key
To print a list using a Macro key:
1
Press the Macro key in which is programmed for the printing lists.
2
Press
Storing fax documents with the Macro key
To store a fax document for either polling or F-Code polling using a Macro key:
1
Insert the document.
2
Press the Macro key which is programmed for the storing operation you
want to use.
3
Press
Fax dialing with the Macro key
To dial a fax call using a Macro key:
1
Insert the document.
2
Press the Macro key in which you've stored the fax communication com-
mand.
3
Press
Your fax will perform the operation now, or at whatever time you programmed.
If you programmed this key to delay its operation, the
If you programmed this key to perform the operation immediately after you press it,
the shows the number:
LCD
, if you have not registered
START START
, if you have not registered
ENTER ENTER
, if you have not registered
ENTER ENTER
, if you have not registered
START START
in the Macro key.
in the Macro key.
in the Macro key.
in the Macro key.
shows:
LCD