Table of Contents
Advertisement
7
The
now asks you to enter your fax number as you want it to appear on
LCD
other fax machines' displays or printouts. The fax industry term for this
number is Subscriber
.
ID
Your Fax Number
8
Use the numeric keypad to enter the fax number. The number may contain up
to 20 characters.
Your Fax Number
9725555525_
Note: If you make a mistake, press
To change just one number, press
Press
to erase the number. Then re-enter the fax number cor-
CANCEL
rectly.
9
Press
to save the number.
ENTER
10
The
now asks you to enter the name you want to appear at the top of
LCD
faxes you send. The name may be up to 22 characters in length.
Use the one-touch keys to enter letters and other non-numeric characters.
(Refer to "Entering characters" on page 1.12.)
Your Name
;Upper
_
11
Press
to save the setting and continue.
ENTER
12
The
now shows the type of dialling:
LCD
Phone Type
:Tone
← ← /→ → /Enter
13
Press
and continue.
ENTER
14
The
now shows the machine's current reception mode.
LCD
Fax Ready
/ /Enter
15
For now, press
or
until the setting Fax Ready appears. (This setting can
always be changed. We'll discuss reception modes further on pages 2.10–2.11.)
16
Press
to save the setting and continue.
ENTER
to erase to the left.
CANCEL
to move left, or
to move right.
17
The
now asks you to enter the time for the sleep mode. Your machine will
LCD
automatically enter sleep mode after your selected idle time has elapsed.
Sleep Mode Timing
(001-240):005
18
Enter the time (in minutes) using the numeric keypad.
19
Press
to save the setting. Your machine will return to standby mode.
ENTER
Getting started
1.19
Advertisement
Chapters
Table of Contents
