Konica Minolta 7013 Operating Instructions Manual page 84

3
If you want to toggle between real time transmission and memory transmis-
sion, press .
MEMORY TRANSMIT
4
Press three times and then press
ADVANCED FUNCTIONS
Enter Sub-Address
_
5
Use the numeric keypad to enter the appropriate sub-address in the remote
machine. In this example, we've entered 123456.
Enter Sub-Address
123456_
Note: If you make a mistake, press
enter the correct number.
6
Press . The shows:
ENTER LCD
Enter Password
_
Note: If this sub-address does not have a password, skip to step 8.
7
Use the numeric keypad to enter the password. In this example, we've
entered 654321.
Enter Password
654321_
8
Press . The shows:
ENTER LCD
Enter Fax Number
_
9
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
10
What you do now depends on when you want the transmission to begin.
• To have it begin now, skip to step 13.
• To delay it, go on to step 11.
11
Press ,
ADVANCED FUNCTIONS ENTER
Delayed
Enter Time: 15/17:05
12
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
.
ENTER
to erase the character, then
CANCEL
START
. The shows:
LCD
.
13
Press .
START
If in step 10 you chose an immediate transmission, your fax machine begins dialing.
If you chose a delayed command, the machine shows "Reserved" on the
ing that it has stored the command in memory and will complete it later.
F-Code polling
1
Press to switch the machine to Fax mode.
FAX
2
Press
ADVANCED FUNCTIONS
Enter Sub-Address
_
3
Use the numeric keypad to enter the appropriate sub-address.
In this example, we've entered 123456.
Enter Sub-Address
123456_
Note: If you make a mistake, press
enter the correct number.
4
Press
ENTER
Enter Password
_
Note: If this sub-address does not have a password, skip to step 6.
5
Use the numeric keypad to enter the password. In this example, we've
entered 654321.
Enter Password
. 654321_
6
Press
ENTER
Enter Fax Number
_
7
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
8
What you do now depends upon when you want the polling to begin.
• To have it begin now, skip to step 11.
• To delay it, go on to step 9.
four times and then press
to erase the character, then
CANCEL
. The shows:
LCD
. The shows:
LCD
Advanced features
, indicat-
LCD
.
ENTER
.
START
3.33