Konica Minolta 7013 Operating Instructions Manual page 83

Advanced features
Erasing an empty F-Code box
An F-Code box must be empty in order to erase it. (If you select an F-Code box in
these steps which is not empty, the machine beeps. If this happens, print all docu-
ments in that box before erasing it.)
To erase an empty F-Code box:
1
Press Program key, , 4, 0, 2,
C
Select F-Code Box
01:No Number Stored
2
Use the numeric keypad to enter the two-digit identifier number (01-50) of
the F-Code box you want to erase. Here, we've entered 0, 3 and see:
Select F-Code Box
03:Konica America
3
If you want to erase a different F-Code box than the one that appears on the
, enter the box number now.
LCD
4
Press . If the F-Code box is empty, the
ENTER
03:Erase F-Code Box
Enter I.D. Code:****
Important: If you select an F-Code box which is not empty, the machine
beeps and, before returning to step 3, briefly displays:
Select F-Code Box
Box In Use
Print any documents received in the F-Code box, then repeat
this procedure from the beginning to erase the box.
Otherwise, select another F-Code box.
5
Use the numeric keypad to enter the four-digit
Here, we've entered 2345:
03:Erase F-Code Box
Enter I.D. Code:2345
3.32
. The shows:
ENTER LCD
Select F-Code Box
or
01:Konica
shows:
LCD
. . code.
I D
6
Press .
ENTER
If you've entered an incorrect
and returns to standby mode.
If you've entered the correct .
I
03:Erase F-Code Box
Check Enter/Cancel
Note: If you want to quit without erasing the F-Code box you've selected,
press . The fax will return to step 2.
CANCEL
Note: If you want to quit without erasing any F-Code box, press
The machine returns to standby mode.
7
Press to erase the F-Code box.
ENTER
Erase F-Code Box
** Complete
To erase another F-Code box, repeat steps 2-7.
To finish, press .
STOP
F-Code transmission and polling
With F-Code, your machine can send secure transmissions, perform relay broadcast
initiations and even poll from other
facturer.
You can do this two ways:
• Using the programmable one-touch key (see pages 3.40–3.43)
• Entering the - sub-address and password directly, which is what we'll
ITU T
describe here.
Note: For F-Code communication to work, three things must be true:
• The remote fax machine must support
• The remote fax must have a mailbox with an
on it
• You must know the -
ITU T
remote machine's mailbox
F-Code transmission
1
Insert the document.
2
Adjust the resolution and contrast if necessary.
. . code, your fax machine rejects the attempt
I D
. code, the display shows:
D
**
- -equipped machines, regardless of manu-
ITU T
- sub-addressing
ITU T
- sub-address created
ITU T
sub-address and password (if any) for the
.
STOP