Installing The Peer To Peer Printing Tool To Connect Using Port 9100 (Windows 98Se/Me) - Konica Minolta BIZHUB 350 User Manual

4
8
Click [RAW], and then enter the RAW port number (default setting:
9100) in the Port Number box.
– If the RAW port number of this machine is changed, input the
specified port number. When the RAW port is disabled in "TCP/IP
Configuration", printing cannot be performed. For details, refer to
"Network tab - Common Setting - TCP/IP" on page 11-75.
9
Click the [Next] button, and then click the [Finish] button to apply the
setting.
Installing the Peer to Peer Printing Tool to connect using Port 9100
(Windows 98SE/Me)
To connect using Port 9100 and to obtain the Peer to Peer Printing Tool,
consult the dealer where you purchased this machine.
To connect to the network using Port 9100, specify the driver settings
described below after installing the Peer to Peer Printing Tool.
!
Detail
To uninstall the Peer to Peer Printing Tool, delete the printer driver using
the Peer to Peer port first, and then delete the Peer to Peer Tool in "Add
or Remove Programs" in the "Control Panel".
Note
If multiple printer drivers are connected to the network and use the Peer
to Peer Printing Tool, all printer drivers connected to the network with the
Peer to Peer Printing Tool can no longer be connected to the network if
the Peer to Peer Printing Tool is uninstalled.
4-20
Setting up network printing
bizhub 350/250 (Phase 2.5)