TUONO 1000
3.3.
THROTTLE BODY UNIT
3.3.1.
REMOVING THE THROTTLE BODY UNIT
WARNING
The screws for the basic adjustment of the
throttle valve (1) are painted and cannot be set.
The adjustment screws can be set only when
replacing
the
completely.
The two M4x12 screws (3) for securing the
throttle valve potentiometer are painted and can
be removed only when replacing the sensor.
•
Partially remove the fuel tank.
•
Remove the air box.
•
Disconnect the electrical connectors:
-
right injector;
-
left injector;
wire
securing
bracket
(2)
FUEL SYSTEM
3 - 21