APRILIA TUONO 1000 Workshop Manual page 45

PERIODIC MAINTENANCE
ODO
The MODE configuration includes all user interface functions.
To select the MODE configuration, set the selector (1) to
MODE.
With the vehicle stopped, at each short press of the SET
button (2), the display cycles through the following readings:
•
CURRENT SPEED
•
BATTERY VOLTAGE
Holding down the SET button (2) gives access to the
configuration menu:
•
MENU
When activated, "distance to empty" indication will be
displayed in place of odometer reading.
MENU
The MENU screen configuration menu can be accessed
when the vehicle is stopped and the selector is set to MODE.
To open this menu, select MENU and hold down the SET
button (2) to confirm.
The configuration menu holds the following options:
• EXIT
• SETTINGS
• LAP TIMER
• DIAGNOSIS
• LANGUAGE
SETTINGS
When you select SETTINGS and hold down the SET button
(2) to confirm, a screen with the following options will appear:
• EXIT
•
TIME SETTINGS
• GEAR SHIFT INDICATOR
•
BACKLIGHTING
• CHANGE THE CODE
•
CODE RECOVERY
• °C / °F
TIME SETTINGS
This option is used to set clock time. At each press of the
SET button (2), hour setting will increase by one unit
from 1 to 12 and then will start over again from 1.
The transition from AM to PM and vice versa coincides with
the transition from 11:59 to 12:00.
Holding down the SET button (2) stores current setting and
gives access to the minutes setting mode. At each press of
the SET button (3), minutes increase by one unit up to 59 and
then go back to 0. Holding down the SET button (2)
terminates the procedure and the instrument panel returns to
the SETTINGS menu.
GEAR SHIFT INDICATOR
This mode is used to set gear change threshold. When this
mode is selected, the
2 - 26
TUONO 1000