TUONO 1000
5.9.3.
REMOVING THE REAR BRAKE DISC
•
Remove the rear wheel.
NOTE To loosen the screws (1) we recommend the use of a
pneumatic screw gun which will resist the strength of the
LOCTITE® 243.
•
Loosen and remove the five brake disc screws (1).
WARNING
When refitting, apply LOCTITE
thread of the brake disc screw.
NOTE When refitting, fit all the screws manually and tighten
them observing a cross pattern in the following order: A-B-C-
D-E.
•
Remove the brake disc (2).
®
243 to the
CYCLE PARTS
5 - 109