APRILIA TUONO 1000 Workshop Manual page 47

PERIODIC MAINTENANCE
C / F
º º
This function is used to select the desired measurement unit
for ambient temperature. When this function is selected, at
each short press of the SET button (2), the display cycles
through the two measurement units:
°C / °F
After choosing the desired unit, hold down the SET button (2)
to store the setting and the instrument panel returns to the
SETTINGS menu.
LAP TIMER
When you select LAP TIMER and hold down the SET button
(2) to confirm, a screen with the following options will appear:
• EXIT
• LAP TIME ON
• VIEW TIMES
• DELETE TIMES
LAP TIME ON
This function turns on Lap Timer display in place of the clock
in the upper portion of the display.
When set to on, Lap Timer display is retained after a Key off,
Key on sequence.
VIEW TIMES
This function displays recorded lap times.
Short-press the SET button (2) to scroll lap time screens, hold
down the button to return to the LAP TIMER menu. Recorded
lap times will be lost if the battery is disconnected.
DELETE TIMES
This function is used to delete recorded lap times.
You will be asked to confirm whether you intend to proceed
before data is deleted. When finished, the display returns to
the LAP TIMER menu.
Lap timer operation
To use the lap timer, select LAP TIME ON and hold down the
SET button (2) to confirm; the upper portion of the display (A)
goes into
time acquisition mode. Briefly press the SET button (2) to
start the lap timer.
Press the SET button (2) again within 10 seconds of timer
starting to cancel count and restart the timer. Pressing the
SET button (2) again after the timer has been running for over
10 seconds stops and stores current count and starts a new
count. Holding down the SET button (2) stops the lap timing
session.
When 40 lap times have been recorded, the word "FULL" is
displayed and acquisition is terminated. To view recorded lap
times, stop the motorcycle, see (STOP) and use the VIEW
TIMES function available in the LAP TIMER menu.
2 - 28
TUONO 1000