APRILIA TUONO 1000 Workshop Manual page 57

TUONO 1000
• Should the FRONT CYLINDER PRESSURE value be
incorrect, turn the FRONT CYLINDER bypass screw.
• Read the residual CO value while alternatively opening
the
Turn the bypass screws if the value is not between 2
and 4 % and if the difference between the two readings
is greater than 0.5 %.
•
Once the CO test is completed, ensure that the
FRONT CYLINDER
CYLINDER PRESSURE
approximately within the specified range.
WARNING
Should the bike be fitted with an Akrapovic
complete exhaust system, please note that the
CO reading obtained with the approved exhaust
system is lower once the Akrapovic system is
installed.
analyser
PRESSURE and
parameter values
valves.
REAR
are
FUEL SYSTEM
3 - 7