TUONO 1000
•
Slide the airbox flap tube out of the throttle unit.
•
Loosen the two ties
WARNING
Be very careful when removing the throttle unit,
as it is connected to the fuel tank by means of
the fuel line.
•
Firmly grasp the throttle unit ; wriggle and slide it out of
the intake flanges.
•
Place the complete throttle unit and the connected fuel
tank on a clean surface.
When reassembling ensure that:
-
the delivery fuel line is neither twisted nor in a position in
which it can be crushed by other components; if
damaged or worn it must be replaced;
-
the delivery fuel line is positioned so that it reaches the
right-hand side of the throttle unit, passing under it,
between the two intake flanges;
-
the throttle unit is perfectly positioned on the intake
flanges;
-
The ties must be correctly fastened.
FUEL SYSTEM
3 - 23