Table of Contents
Advertisement
CYCLE PARTS
•
Turn the swingarm pivot anticlockwise (2); this will turn
and drag the adjustment bushing (3) loosening it
completely.
WARNING
Removal must be carried out with utmost care.
Support the front end of the swingarm to avoid
accidental falling.
Place a wooden support under the front end of
the swingarm to prevent it from lowering and
keep it in position.
•
Place the support under the front end of the swingarm.
•
Support the front end of the swingarm.
•
Slide the swingarm pivot (2) out from the right-hand
side.
WARNING
When removing the swingarm ensure that the
drive chain does not tangle up.
•
Support the front of the swingarm and be prepared to
guide its movement.
•
Using the rear support stand, slide the swingarm out
from the rear until it is out of the way of the vehicle.
•
Slide the adjustment bushing (3) out of the swingarm
pivot (2)
5 - 64
TUONO 1000
Advertisement
Chapters
Table of Contents
