APRILIA TUONO 1000 Workshop Manual page 203

TUONO 1000
• Working on the right-hand side, insert the shock
absorber lower screw.
• Tighten the nut on the opposite side.
•
Working on the right-hand side, insert the double-
connecting rod/swingarm screw.
•
Tighten the nut on the opposite side.
•
Fit the support plate complete with brake calliper and
speed sensor.
•
Tighten the three guard fixing screws complete with
washers.
•
Fit the sprocket cover and tighten the three screws.
•
Fit the rear wheel and the exhaust system.
•
Adjust the drive chain tension.
CYCLE PARTS
5 - 69