CYCLE PARTS
5.4.5.
REMOVING THE REAR SUSPENSION CONNECTING RODS
•
Working from the right-hand side of the vehicle, loosen
and remove the nut (1).
•
Remove the screw from the opposite side (2).
•
Loosen and remove the nut (3).
•
Remove the screw from the opposite side (4).
•
Loosen and remove the nut (5).
•
Remove the screw from the opposite side (6).
•
Remove the complete suspension connecting rod unit
(7).
NOTE When reassembling, grease the connecting rod pivot
points; ensure that all the parts are correctly positioned and
check repeatedly that all joints move freely.
5 - 60
TUONO 1000