APRILIA TUONO 1000 Workshop Manual page 197

TUONO 1000
• Working on the left-hand side, loosen and remove the
double-connecting rod/swingarm nut.
• Remove the screw from the opposite side.
•
Working on the left-hand side, loosen and remove the
shock absorber lower nut.
•
Remove the screw from the opposite side.
•
Loosen and remove the nut and set aside the washer.
NOTE Use the special tool (OPT):
- aprilia part# 8140191 (tool for tightening swingarm pivot
and supporting engine).
• Use the box spanner to loosen and remove the ring nut
(1) on the right-hand side of the vehicle.
CYCLE PARTS
5 - 63