TUONO 1000
WARNING
Ensure that the ends of the torsion spring (20)
are hooked to the accelerator wire securing
staff and belt roller (21).
NOTE Spray the spring (20) with temporary lubricant.
•
Fit the spring washer (22).
®
NOTE Apply LOCTITE
243 to the nut threading (23).
•
Tighten the M8x1 nut (23).
®
NOTE Apply LOCTITE
243 to the screw threading (25).
•
Secure the accelerator wire securing bracket (24) with
the three T.E M5x12 screws (25).
•
Fit the throttle valve control lever (26).
FUEL SYSTEM
3 - 29