CYCLE PARTS
5.4.2.
DISASSEMBLING THE REAR SUSPENSION
•
Secure the motorcycle using slings and an A-frame.
•
Working from the right-hand side of the vehicle, loosen
the upper screw (1) but do not remove it and remove
the nut.
•
Working from the left-hand side of the vehicle, loosen
the lower screw (2) but do not remove it and remove
the nut.
•
Operate the A-frame to raise the motorcycle just
enough to remove load from the swingarm, but do not
lift the motorcycle off the ground.
•
Remove the upper screw (1).
•
Remove the lower screw (2).
5 - 54
TUONO 1000