Table of Contents
Advertisement
CYCLE PARTS
7.1.7.
ENGINE RPM LIMITATION CONDITION
The control unit limits engine rpm in case one of the following events occurs:
-
TPS signal missing.
-
stepper motor signal missing.
-
low oil pressure.
-
On the Axone DEVICES STATUS page, the parameter INITIALISED ECU is "NO".
-
water temperature above 120 °C (248 °F).
-
if the ECU detects a failure of a set of signals that might compromise safe use of the vehicle. For example: TPS and
intake pressure signals missing at the same time.
7 - 20
TUONO 1000
Advertisement
Chapters
Table of Contents
