RSV 1000 R - RSV 1000 R FACTORY
5.9.3.
REMOVING THE REAR BRAKE DISC
•
Remove the rear wheel.
NOTE To unscrew the screws (1), it is advisable to use an
impact driver, thanks to which it will be possible to detach
the screws from the LOCTITE
•
Loosen and remove the five brake disc screws (1).
CAUTION
When reassembling, apply LOCTITE
the thread of the brake disc screws (1).
NOTE When reassembling, insert all the screws by hand
and tighten them in a crisscross pattern in the following or-
der: A-B-C-D-E.
•
Remove the brake disc (2).
®
243.
®
243 on
CYCLE PARTS
5 - 131