Feeding Assembly; Removing The Feeding Belt - Canon iR5000 Service Manual

CHAPTER 5 PICK UP/FEEDING SYSTEM

9.5 Feeding Assembly

9.5.1 Removing the Feeding Belt

1) Slide the fixing/feeding unit from the
machine.
2) Remove the fixing front cover, feeding
right cover, and feeing left cover.
3) Disconnect the two connectors [1], and
remove the screw [2]; then, detach the
harness guide [3].
4) Remove the two mounting screws [4],
and detach the fixing/feeding unit re-
leasing lever support [5].
5) Remove the E-ring [6], bearing [7], and
two screws [8] from the front.
6) Remove the E-ring [9], pulley [10], pin
[11], three screws [12], E-ring [13], and
bearing [14]; then, detach the feeding
belt unit [15].
5-68 P
Download Free Service Manual at http://printer1.blogspot.com
COPYRIGHT © 2000 CANON INC.
[3]
F05-905-01
[5]
[4]
F05-905-02
[7]
F05-905-03
[15]
[14]
[12] [13]
F05-905-04
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
[1]
[2]
[1]
[4]
[6] [8]
[11] [10]
[9]