Canon iR5000 Service Manual page 6

INTRODUCTION
The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specific functions and the re-
lationship between electrical and mechanical systems with reference to the timing of
operation.
In the diagrams,
accompanies the symbol
nal.
The expression "turn on the power" means flipping on the power switch, closing the
front door, and closing the delivery unit door, which results in supplying the machine
with power.
2. In the digital circuits, '1' is used to indicate that the voltage level of a given signal is
"High," while '0' is used to indicate "Low." (The voltage value, however, differs from
circuit to circuit.) In addition, the asterisk (*) as in "DRMD*" indicates that the
DRMD signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be
checked in the field. Therefore, the operations of the microprocessors used in the ma-
chines are not discussed: they are explained in terms of from sensors to the input of the
DC controller PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product
improvement or other purposes, and major changes will be communicated in the form of
Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Ser-
vice Manual and all relevant Service Information bulletins and be able to identify and isolate
faults in the machine.
i v
Download Free Service Manual at http://printer1.blogspot.com
represents the path of mechanical drive; where a signal name
, the arrow indicates the direction of the electric sig-
COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000