Cleaning The Cleaner Side Scraper - Canon iR5000 Service Manual

7.11.5 Cleaning the Cleaner Side Scraper

Perform the following when replacing the cleaning blade (every 500,000 sheets).
1) Remove the cleaning blade.
2) Remove any paper lint collecting at the tip of the side scarper (A, i.e., between magnet
roller and toner guide roller) using tweezers or the like.
3) Remove the toner from the surface of the magnet roller. (Roll copy paper into a U to
scoop it up.)
Remove waste toner
A
Toner guide roller
Side scraper (front)
F04-711-09
4) Turn the magnet roller clockwise (viewing from the front).
5) Repeat steps 3) through 5) until the area from which toner was removed in step 3) is
once again coated with an even layer of toner.
COPYRIGHT © 2000 CANON INC.
Download Free Service Manual at http://printer1.blogspot.com
4 to 8mm
(front)
2000 2000 2000 2000 CANON iR5000/iR6000 REV.0 JULY 2000
CHAPTER 4 IMAGE FORMATION SYSTEM
Side scraper (rear)
Toner guide roller
A
Remove waste toner
F04-711-10
Magnet roller
(rear)
4 to 8mm
4-83 P