Privacy Mask; Figure 4-11 Privacy Mask - Honeywell 30 Series Configuration Manual

It is recommended that this function be used only when you have a
solid object in your view window that is showing a consistent color or
Note
texture. This function will not take effect if you set the focus window
on a distant background.

Privacy Mask

Go to Setup Camera Setup  PropertiesPrivacy Mask.
Masks areas of the video for privacy.
To configure privacy masks
1. Click New to add a new window.
2. Use 4 mouse clicks to create a new masking window, which is recommended to be at least
twice the size of the object (height and width) you want to cover.
3. Enter a Window Name and click Save to enable the setting.
4. Check Enable privacy mask to enable this function.

Figure 4-11 Privacy Mask

•
Note
•
Up to 5 privacy mask windows can be configured on the
same screen.
If you want to delete the privacy mask window, click the 'x'
mark on the right side of window name.
Configuring Camera Settings
29