HP ProCurve Series 4100GL Management And Configuration Manual page 181

Optimizing Traffic Flow with Port Controls, Port Trunking, and Port-Based Priority
Syntax:
show interfaces brief
show interface config
These two commands display the information listed in
table 10-10-2, below.
Table 10-2. Comparing the "Show Interfaces" Command Options*
Feature Show Interfaces Brief
Port Number and Type
Enabled Y/N
Flow Control
Status Up/Down
Mode (Operating)
Intrusion Alert
Mode (Configured)
* There is also the show interfaces [[e] < port-number >] option, which displays
port statistics. Refer to "Viewing Port and Trunk Group Statistics and Flow
Control Status" on page B-9.
The figures 10-3 and 10-4 list examples of the output of the above two
commands for the same port configuration.
Figure 10-3. Example of a Show Interface Command Listing
Viewing Port Status and Configuring Port Parameters
Show Interfaces Config
Yes
Yes
Yes
Yes
Yes
Yes
No
Current Operating Mode
Yes
Yes
Yes
No
No
No
Yes
10-7