D Spanning-Tree Protocol (Stp); Menu: Configuring 802.1D Stp - HP ProCurve Series 4100GL Management And Configuration Manual

802.1w Rapid Spanning Tree Protocol (RSTP) and 802.1d Spanning Tree Protocol (STP)

802.1D Spanning-Tree Protocol (STP)

Figure 14-5. The Default "Spanning Tree Operation" Screen
14-18

802.1D Spanning-Tree Protocol (STP)

Menu: Configuring 802.1D STP

1. From the Main Menu, select:
2. Switch Configuration . . .
4. Spanning Tree Operation
2. Press (for ) to highlight the Protocol Version field. In the default
[E] Edit
configuration this field is set to RSTP.
3. Press the Space bar once to change the field to STP. This changes the
Protocol Version selection to the 802.1D Spanning Tree Protocol.
Press [v] to highlight the STP Enabled field.
4.
5. Press the Space bar to select Yes . (Yes in this field means to enable
spanning-tree operation.)
Use this field to select the 802.1D version of STP.