Listing Switch Configuration and Operation Details for Help
in Troubleshooting
Release G.04.05 and greater includes the
outputs, in a single listing, switch operating and running configuration details
from several internal switch sources, including:
■
Image stamp (software version data)
Running configuration
■
■
Event Log listing
■
Boot History
Port settings
■
Status and counters — port status
■
■
IP routes
Status and counters — VLAN information
■
GVRP support
■
■
Load balancing (trunk and LACP)
Stacking status — this switch
■
Stacking status — all
■
Syntax:
show tech
Executing
outputs a data listing to your terminal emulator. However,
show tech
using your terminal emulator's text capture features, you can also save
data to a text file for viewing, printing, or sending to an associate. For
tech
example, if your terminal emulator is the Hyperterminal application available
with Microsoft® Windows® software, you can copy the show tech output to
a file and then use either Microsoft Word or Notepad to display the data. (In
this case, Microsoft Word provides the data in an easier-to-read format.)
To Copy show tech output to a Text File. This example uses the
Microsoft Windows terminal emulator. To use another terminal emulator
application, refer to the documentation provided with that application.
command. This command
show tech
Troubleshooting
Diagnostic Tools
show
C-37