Messages Related To Prioritization; Troubleshooting Prioritization - HP ProCurve Series 4100GL Management And Configuration Manual

Optimizing Traffic Flow with Port Controls, Port Trunking, and Port-Based Priority
Configuring Port-Based Priority for Incoming Packets
Figure 10-15. Example of Configuring Non-Default Prioritization on Untagged, Inbound Traffic
Message
< priority-level >: Unable to create.
10-38

Messages Related to Prioritization

Troubleshooting Prioritization

Refer to "Prioritization Problems" on page C-7 in the "Troubleshooting" chap­
ter.
Ports A9 - A12 are now configured to
assign a priority level of "1" (Low) to
untagged, incoming traffic. (Any
inbound, tagged traffic retains its
priority level while transiting the
switch.)
Meaning
The port(s) on which you are trying to configure a qos
priority may belong to a port trunk. Trunked ports cannot be
configured for qos priority.
Configures port-based
priority on ports A9 -A12
to "1" (Low) and saves
the configuration
changes to the startup­
config file.