HP ProCurve Series 4100GL Management And Configuration Manual page 224

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Add mapping to allow write access for
Operator community on
Figure 11-4. Assigning a Community to a Group Access Level
11-12
Figure 11-4 shows the assigning of the Operator community on MgrStation1
to the CommunityOperatorReadWrite group. Any other Operator only has an
access level of CommunityOperatorReadOnly.
MgrStation1
Table 11-1. SNMP Community Features
Feature
SNMP
show communities
configure identity information
configure community names
MIB view for a community name
(operator, manager)
write access for default
community name
Use SNMP communities to restrict access to the switch by SNMP management
stations by adding, editing, or deleting SNMP communities. You can configure
up to five SNMP communities, each with either an operator-level or a manager-
level view, and either restricted or unrestricted write access.
Using SNMP requires that the switch have an IP address and subnet mask
compatible with your network.
Two Operator Access Levels
Default Menu
n/a page
11-13
none —
public page
11-13
manager "
"
unrestricted "
CLI Web
page —
11-15
page
11-16
page —
11-16
"
"
"