HP ProCurve Series 4100GL Management And Configuration Manual page 298

Port-Based Virtual LANs (VLANs) and GVRP
GVRP
12-46
Figure 12-32. Example of Listing Showing Dynamic VLANs
Converting a Dynamic VLAN to a Static VLAN. If a port on the switch
has joined a dynamic VLAN, you can use the following command to convert
that dynamic VLAN to a static VLAN:
Syntax:
static <dynamic-vlan-id>
For example, to convert dynamic VLAN 333 (from the previous example) to a
static VLAN:
HPswitch(config)# static 333
When you convert a dynamic VLAN to a static VLAN, all ports on the switch
are assigned to the VLAN in Auto mode.
Web: Viewing and Configuring GVRP
To view, enable, disable, or reconfigure GVRP:
1. Click on the Configuration tab.
Click on VLAN Configuration and do the following:
2.
• To enable or disable GVRP, click on GVRP Enabled.
• To change the Unknown VLAN field for any port:
Click on GVRP Security and make the desired changes.
i.
ii. Click on Apply to save and implement your changes to the
Unknown VLAN fields.
For web-based Help on how to use the web browser interface screen, click on
the button provided on the web browser screen.
[?]
Dynamic VLANs
Learned from
Switch "A"
through Port 1