Using The Menu Interface To View Stack Status And Configure; Using The Menu Interface To View And Configure A Commander Switch; Stacking - HP ProCurve Series 4100GL Management And Configuration Manual

Using the Menu Interface To View Stack Status and
Configure Stacking
Using the Menu Interface To View and Configure a
Commander Switch
1. Configure an IP address and subnet mask on the Commander switch.
(See Chapter 8, "Configuring IP Addressing".)
2. Display the Stacking Menu by selecting Stacking in the Main Menu.
Figure 15-5. The Default Stacking Menu
3. Display the Stack Configuration menu by pressing
Configuration.
Figure 15-6. The Default Stack Configuration Screen
HP ProCurve Stack Management
Configuring Stack Management
to select Stack
[3]
15-13