HP ProCurve Series 4100GL Management And Configuration Manual page 356

802.1w Rapid Spanning Tree Protocol (RSTP) and 802.1d Spanning Tree Protocol (STP)
802.1D Spanning-Tree Protocol (STP)
14-34
Figure 14-17. Example of STP Enabled with Two Redundant Links Configured for
Fast-Uplink STP
5. Press (for ) to save the configuration changes to flash (non-volatile)
[S] Save
memory.
To View Fast-Uplink STP Status. Continuing from figures 14-16 and 14-17
in the preceding procedure, this task uses the same screen that you would use
to view STP status for other operating modes.
1. From the Main Menu, select:
1. Status and Counters . . .
7. Spanning Tree Information
STP is enabled.
Port A1 and Trk1 are
now configured for
fast-uplink STP.