Port And Static Trunk Monitoring Features - HP ProCurve Series 4100GL Management And Configuration Manual

N o t e
Port and Static Trunk Monitoring
Features
Port Monitoring Features
Feature
display monitoring
configuration
configure the monitor port(s) ports: none
selecting or removing ports none selected
You can designate a port for monitoring incoming traffic of other ports and of
static trunks on the switch. The switch monitors the network activity by
copying all traffic inbound on the specified interfaces to the designated
monitoring port, to which a network analyzer can be attached.
Port trunks cannot be used as a monitoring port.
It is possible, when monitoring multiple interfaces in networks with high
traffic levels, to copy more traffic to a monitor port than the link can support.
In this case, some packets may not be copied to the monitor port.
Monitoring and Analyzing Switch Operation

Port and Static Trunk Monitoring Features

Default Menu
disabled page B-24 page B-26 page B-28
page B-24 page B-26 page B-28
page B-24 page B-27 page B-28
CLI Web
B-23